空機事業ﾄｯﾌﾟｲﾒｰｼﾞ
Pneumatic Equipment TOP Products Information
Material
Overseas Network
to PDF Catalogue page

Pneumatic Tools catalogue is available in PDF.

Impact Wrenches (Two Hammer)

The Two-Hammer Impact Wrenches are almostly used in assembling line. These wrenches have distinguishing feature of high speed work.

 

●Pistol type 9.5mm(3/8")Sq.
NW-5LP_photo
NW-6HPA_photo
NW-5LP(P)
NW-5LP(S)
NW-6HPA(P)
NW-6HPA(S)

　

●Straight type 9.5mm(3/8")Sq.
NW-6HS_photo
NAW-6HS_photo
 　
NW-6HS(P)
NW-6HS(S)
NAW-6HS(P)
NAW-6HS(S)
　

　

●Pistol type 12.7mm(1/2")Sq.
NW-8HPA_photo
NW-10HPA_photo
NW-14H_photo
NW-8HPA(P)
NW-8HPA(S)
NW-10HPA(P)
NW-10HPA(S)
NW-14H(P)
NW-14H(S)

　

●Standard type 19.05mm(3/4")Sq.
NW-16HS_photo
NW-16HSA_photo
NW-16HS(P)
(4 steps of power control)
NW-16HSA(P)
(4 steps of power control)

　

●19.05mm(3/4")Sq.
NAW-19A_photo
NAW-19AA_photo
NAW-22A_photo
NAW-19A(P)
(4 steps of power control)
NW-19AA(P)
(4 steps of power control)
NW-22A(P)
(4 steps of power control)

　

●19.05mm(3/4")Sq.
NW-22AA_photo
NAW-16HS_photo
NAW-19A_photo
NW-22AA(P)
(4 steps of power control)
NAW-16HS(P)
(4 steps of power control)
NAW-19A(P)
(4 steps of power control)

　

●25.4mm(1")Sq.
NW-32LA_photo
NW-38_photo
NAW-32LA_photo
NW-32LA(P)
(4 steps of power control)
NW-38(P)
(4 steps of power control)
NAW-32LA(P)
(4 steps of power control)

　

 

【Specification】

＊Specificatioins are subject to change without notice.
＊Recommended air pressure 0.6MPa(6kgf/cm2, 85psi)

Model Capacity
(Bolt size)		 Free
speed 		Overall
length 		Mass spindle
offset 		Square shank size Air Inlet thread Hose size Average
air
Consumption
mm min-1 mm kg mm mm Rc mm m3/min
NW-5LP 6 12,000 151 0.6 16.5 9.5 1/4 6.3 0.25
NW-6HPA 8 8,000 158 0.9 24 9.5 1/4 6.3 0.25
NW-6HS 8 9,000 217 0.9 24 9.5 1/4 6.3 0.25
NAW-6HS 6 8,000 239 1.5 14.5 1/4 6.3 0.25
NW-8HPA 10 6,500 165 1.5 28 12.7 1/4 6.3 0.3
NW-10HPA 12 6,000 169 1.7 31 12.7 1/4 9.5 0.35
NW-14H 16 5,500 196 3 34.5 12.7 1/4 9.5 0.35
NW-16HS 18 4,000 318 5.5 41.5 19.05 3/8 12.7 0.45
NW-16HSA 18 4,000 339 5.8 41.5 19.05 3/8 12.7 0.45
NW-19A 20 4,500 346 6.5 45 19.05 3/8 12.7 0.55
NW-19AA 20 4,500 390 7 45 19.05 3/8 12.7 0.55
NW-22A 22 4,500 383 7.4 45 19.05 3/8 12.7 0.6
NW-22AA 22 4,500 399 8 45 19.05 3/8 12.7 0.6
NAW-16HS 16 3,500 386 9.6 30 19.05 3/8 12.7 0.45
NAW-19A 18 4,000 415 10.6 31 19.05 3/8 12.7 0.5
NW-32LA 33 4,000 383 10.7 55.5 25.4 1/2 12.7 0.85
NW-38 39 3,000 463 15.3 62.5 25.4 1/2 12.7 0.9
NAW-32LA 22 3,500 484 18 43 25.4 1/2 12.7 0.85